版本：WW（通用版本）

以上芯片适用于：Dell 1130 / 1130n / 1133 / 1135n

默认该芯片为通用芯片，未标注鼓芯片/粉芯片特定区分。

若用于粉盒：注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

若用于鼓组件：要确保硒鼓完好状态下更换，才不容易出现代码报错。

在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

Version: WW (Universal Version)

This chip is compatible with: Dell 1130 / 1130n / 1133 / 1135n

By default, this is a universal chip without specific designation as a drum chip or toner cartridge chip.

If used for toner cartridges: Ensure the toner is completely filled before replacing the chip; otherwise, the chip may not activate or may indicate insufficient toner level.

If used for drum units: Ensure the drum is in good condition before replacement to avoid error codes.

When handling and installing chips (particularly in dry autumn environments), discharge static electricity from your body or wear an anti-static wrist strap to prevent chip damage.

Version: WW (Universal Version)

This chip is compatible with: Dell 1130 / 1130n / 1133 / 1135n

By default, this is a universal chip without specific designation as a drum chip or toner cartridge chip.

If used for toner cartridges: Ensure the toner is completely filled before replacing the chip; otherwise, the chip may not activate or may indicate insufficient toner level.

If used for drum units: Ensure the drum is in good condition before replacement to avoid error codes.

When handling and installing chips (particularly in dry autumn environments), discharge static electricity from your body or wear an anti-static wrist strap to prevent chip damage.

说明：原参数列标签已按实际含义重组——MONO为黑色单色，2K表示标准印量约2000页；版本NA对应北美区域适配版本。

以上芯片适用于：Dell 1125mfp

适配机型：Dell 1125mfp

类型区分：当前参数未明确标注鼓芯片或粉盒芯片，按默认规则归为通用芯片（无鼓/粉区分）。

粉盒芯片提示：若为粉盒芯片使用场景，注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

鼓芯片提示：若为鼓芯片使用场景，要确保硒鼓完好状态下更换，才不容易出现代码报错。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。

Note: The original parameter column labels have been reorganized according to actual meanings — Mono indicates black monochrome; 2K denotes a standard yield of approximately 2,000 pages; Version NA corresponds to the North America region compatible version.

This chip is compatible with: Dell 1125mfp

Compatible Models: Dell 1125mfp

Type Classification: The current parameters do not explicitly specify whether this is a drum chip or toner cartridge chip; by default, it is classified as a universal chip (no distinction between drum and toner cartridge).

Toner Cartridge Chip Note: If used as a toner cartridge chip, ensure the toner is fully replenished before replacing the chip; otherwise, the chip may fail to activate or may indicate an insufficient toner level.

Drum Chip Note: If used as a drum chip, ensure the photoconductor drum is in good condition before replacement to minimize error code occurrences.

Anti-Static Warning: When handling and installing chips (especially in dry autumn conditions), discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic damage to the chip.

The chips manufactured and sold by our company are compatible chips and are not directly affiliated with the original brand.

Note: The original parameter column labels have been reorganized according to actual meanings — Mono indicates black monochrome; 2K denotes a standard yield of approximately 2,000 pages; Version NA corresponds to the North America region compatible version.

This chip is compatible with: Dell 1125mfp

Compatible Models: Dell 1125mfp

Type Classification: The current parameters do not explicitly specify whether this is a drum chip or toner cartridge chip; by default, it is classified as a universal chip (no distinction between drum and toner cartridge).

Toner Cartridge Chip Note: If used as a toner cartridge chip, ensure the toner is fully replenished before replacing the chip; otherwise, the chip may fail to activate or may indicate an insufficient toner level.

Drum Chip Note: If used as a drum chip, ensure the photoconductor drum is in good condition before replacement to minimize error code occurrences.

Anti-Static Warning: When handling and installing chips (especially in dry autumn conditions), discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic damage to the chip.

The chips manufactured and sold by our company are compatible chips and are not directly affiliated with the original brand.

版本说明：CHN 为中国区域版本；EXP 为特殊版本，请按实际机器匹配。

以上芯片适用于：Dell B1260 / B1260dn / 1265nf

类型说明：本参数表未标注鼓或粉，默认为通用芯片。

• 若为粉盒芯片：请注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。
• 若为鼓芯片：要确保硒鼓完好状态下更换，才不容易出现代码报错。

  防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

Version Note: CHN denotes China Region Version; EXP denotes Special Version. Please match according to the actual printer model.

The above chips are suitable for: Dell B1260 / B1260dn / 1265nf

Type Note: This parameter table does not specify whether the chip is for drum unit or toner cartridge; it is a universal chip by default.

• For Toner Cartridge Chips: Please refill the toner cartridge to full capacity before replacing the chip; otherwise, the chip may not activate or may prompt insufficient value warnings.
• For Drum Chips: Ensure the drum unit is in good condition before replacement to avoid error code occurrences.

  Anti-static Warning: When handling and installing chips (particularly in dry autumn environments), discharge any static electricity from your body or wear an anti-static wrist strap to prevent chip damage.

Version Note: CHN denotes China Region Version; EXP denotes Special Version. Please match according to the actual printer model.

The above chips are suitable for: Dell B1260 / B1260dn / 1265nf

Type Note: This parameter table does not specify whether the chip is for drum unit or toner cartridge; it is a universal chip by default.

• For Toner Cartridge Chips: Please refill the toner cartridge to full capacity before replacing the chip; otherwise, the chip may not activate or may prompt insufficient value warnings.
• For Drum Chips: Ensure the drum unit is in good condition before replacement to avoid error code occurrences.

  Anti-static Warning: When handling and installing chips (particularly in dry autumn environments), discharge any static electricity from your body or wear an anti-static wrist strap to prevent chip damage.

本产品为碧砚品牌兼容芯片，适配对应戴尔粉盒使用。

版本说明：WW 代表通用版本。

以上芯片适用于：Dell Cloud Multifunction H815dw / Dell Smart Multifunction S2815dn / S2810dn

适配机型：Dell Cloud Multifunction H815dw、Dell Smart Multifunction S2815dn、S2810dn

本品为粉盒兼容芯片，无鼓芯片/粉芯片区分，仅适配对应型号粉盒使用。

更换芯片前请确认粉盒已加注足量碳粉，若碳粉未加满更换芯片，可能出现芯片不生效或提示余量不足的情况。

安装和使用芯片时（尤其秋季干燥环境），请先去除人体静电或佩戴防静电手环，避免静电击穿芯片导致失效。

若本芯片配套硒鼓组件使用，请确保硒鼓状态完好，可降低代码报错概率。

本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。

This product is a BiYan brand compatible chip, designed for use with the corresponding Dell toner cartridges.

Version Description: WW represents the universal version.

The above chips are compatible with: Dell Cloud Multifunction H815dw / Dell Smart Multifunction S2815dn / S2810dn

Compatible Models: Dell Cloud Multifunction H815dw, Dell Smart Multifunction S2815dn, S2810dn

This product is a toner cartridge compatible chip. There is no distinction between drum chip and toner chip. It is only compatible with the corresponding model toner cartridges.

Before replacing the chip, please confirm that the toner cartridge has been refilled with sufficient toner powder. If the chip is replaced before the toner is fully filled, the chip may not function properly or may indicate insufficient remaining toner.

When installing and using the chip (especially in dry autumn environments), please first discharge static electricity from the human body or wear an anti-static wristband to avoid chip failure caused by electrostatic breakdown.

If this chip is used with a drum assembly, please ensure the drum is in good condition to reduce the probability of error codes.

The chips produced and sold by our company are compatible chips and have no direct affiliation with the original brand.

本产品为碧砚品牌兼容芯片，适配对应戴尔粉盒使用。

版本说明：WW 代表通用版本。

以上芯片适用于：Dell Cloud Multifunction H815dw / Dell Smart Multifunction S2815dn / S2810dn

适配机型：Dell Cloud Multifunction H815dw、Dell Smart Multifunction S2815dn、S2810dn

本品为粉盒兼容芯片，无鼓芯片/粉芯片区分，仅适配对应型号粉盒使用。

更换芯片前请确认粉盒已加注足量碳粉，若碳粉未加满更换芯片，可能出现芯片不生效或提示余量不足的情况。

安装和使用芯片时（尤其秋季干燥环境），请先去除人体静电或佩戴防静电手环，避免静电击穿芯片导致失效。

若本芯片配套硒鼓组件使用，请确保硒鼓状态完好，可降低代码报错概率。

本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。

This product is a BiYan brand compatible chip, designed for use with the corresponding Dell toner cartridges.

Version Description: WW represents the universal version.

The above chips are compatible with: Dell Cloud Multifunction H815dw / Dell Smart Multifunction S2815dn / S2810dn

Compatible Models: Dell Cloud Multifunction H815dw, Dell Smart Multifunction S2815dn, S2810dn

This product is a toner cartridge compatible chip. There is no distinction between drum chip and toner chip. It is only compatible with the corresponding model toner cartridges.

Before replacing the chip, please confirm that the toner cartridge has been refilled with sufficient toner powder. If the chip is replaced before the toner is fully filled, the chip may not function properly or may indicate insufficient remaining toner.

When installing and using the chip (especially in dry autumn environments), please first discharge static electricity from the human body or wear an anti-static wristband to avoid chip failure caused by electrostatic breakdown.

If this chip is used with a drum assembly, please ensure the drum is in good condition to reduce the probability of error codes.

The chips produced and sold by our company are compatible chips and have no direct affiliation with the original brand.

版本：WW（通用版本）

以上芯片适用于：Dell Cloud Multifunction H815dw / Dell Smart Multifunction S2815dn

类型区分：参数未标注鼓/粉，默认为芯片；本型号适用于黑色粉盒。

粉盒芯片提示：注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

鼓芯片提示：要确保硒鼓完好状态下更换，才不容易出现代码报错。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。

Version: WW (Universal Version)

This chip is compatible with: Dell Cloud Multifunction H815dw / Dell Smart Multifunction S2815dn

Type Distinction: If the drum/toner type is not specified in the parameters, it defaults to a chip; this model is applicable to black toner cartridges.

Toner Cartridge Chip Notice: Ensure the toner cartridge is completely filled before replacing the chip. Otherwise, the chip may not function properly or may indicate insufficient supply.

Drum Chip Notice: Ensure the photoconductor drum is in good condition before replacing the chip to avoid error codes.

Anti-Static Warning: When handling and installing the chip (especially in dry autumn conditions), discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to the chip.

The chips manufactured and sold by our company are compatible chips and are not directly affiliated with the original brand.

Version: WW (Universal Version)

This chip is compatible with: Dell Cloud Multifunction H815dw / Dell Smart Multifunction S2815dn

Type Distinction: If the drum/toner type is not specified in the parameters, it defaults to a chip; this model is applicable to black toner cartridges.

Toner Cartridge Chip Notice: Ensure the toner cartridge is completely filled before replacing the chip. Otherwise, the chip may not function properly or may indicate insufficient supply.

Drum Chip Notice: Ensure the photoconductor drum is in good condition before replacing the chip to avoid error codes.

Anti-Static Warning: When handling and installing the chip (especially in dry autumn conditions), discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to the chip.

The chips manufactured and sold by our company are compatible chips and are not directly affiliated with the original brand.

版本：WW（通用版本）

以上芯片适用于：HP OfficeJet Pro 9010 / 9010e / 9012 / 9013 / 9014 / 9016 / 9018 / 9018e / 9019e / 9020 / 9022e / 9023 / 9025 / 9026 / 9028

安装前确认打印机已开机并处于就绪状态。将芯片触点朝下，对准墨盒芯片槽位平稳推入，听到轻微卡扣声表示安装到位。更换后打印机将自动读取并重置计数。若开机后仍报错或提示非原装芯片，请取出芯片，用无水酒精擦拭触点晾干后重新安装。

类型区分：以上芯片为喷墨墨盒计数复位芯片，用于惠普96UX系列墨盒，不适用于粉盒或硒鼓芯片。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

Version: WW (Universal Version)

The above chips are compatible with: HP OfficeJet Pro 9010 / 9010e / 9012 / 9013 / 9014 / 9016 / 9018 / 9018e / 9019e / 9020 / 9022e / 9023 / 9025 / 9026 / 9028

Before installation, confirm that the printer is powered on and in ready status. Position the chip with contacts facing downward, align it with the cartridge chip slot, and insert smoothly. A slight clicking sound indicates proper installation. After replacement, the printer will automatically read and reset the page counter. If errors persist after powering on or the printer prompts that a non-original chip is detected, remove the chip, wipe the contacts with anhydrous alcohol, allow them to dry completely, and reinstall.

Type Specification: The above chips are ink cartridge counting reset chips designed for HP 96UX series ink cartridges. They are not applicable to toner cartridges or drum chips.

Anti-static Warning: When handling and installing chips (particularly in dry autumn conditions), discharge static electricity from your body first or wear an anti-static wrist strap to prevent electrostatic damage to the chip.

Version: WW (Universal Version)

The above chips are compatible with: HP OfficeJet Pro 9010 / 9010e / 9012 / 9013 / 9014 / 9016 / 9018 / 9018e / 9019e / 9020 / 9022e / 9023 / 9025 / 9026 / 9028

Before installation, confirm that the printer is powered on and in ready status. Position the chip with contacts facing downward, align it with the cartridge chip slot, and insert smoothly. A slight clicking sound indicates proper installation. After replacement, the printer will automatically read and reset the page counter. If errors persist after powering on or the printer prompts that a non-original chip is detected, remove the chip, wipe the contacts with anhydrous alcohol, allow them to dry completely, and reinstall.

Type Specification: The above chips are ink cartridge counting reset chips designed for HP 96UX series ink cartridges. They are not applicable to toner cartridges or drum chips.

Anti-static Warning: When handling and installing chips (particularly in dry autumn conditions), discharge static electricity from your body first or wear an anti-static wrist strap to prevent electrostatic damage to the chip.

版本：CHN（中国区域版本）

以上芯片适用于：新北洋 KMS8WB

类型区分：本产品为粉盒芯片。

粉盒芯片提示：注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

Version: CHN (China Region Version)

This chip is applicable to: SNBC KMS8WB

Type Distinction: This product is a toner cartridge chip.

Toner Cartridge Chip Note: Ensure the toner is fully refilled before replacing the chip; otherwise, the chip may not function or may indicate an insufficient fill level.

Static Electricity Warning: When handling and installing the chip (especially during dry autumn conditions), discharge static electricity from the human body first or wear an anti-static wrist strap to prevent chip damage from electrostatic discharge.

Version: CHN (China Region Version)

This chip is applicable to: SNBC KMS8WB

Type Distinction: This product is a toner cartridge chip.

Toner Cartridge Chip Note: Ensure the toner is fully refilled before replacing the chip; otherwise, the chip may not function or may indicate an insufficient fill level.

Static Electricity Warning: When handling and installing the chip (especially during dry autumn conditions), discharge static electricity from the human body first or wear an anti-static wrist strap to prevent chip damage from electrostatic discharge.

版本说明：AP（亚太区域）、CHN（中国区域）、JPN（日本区域）。以上芯片适用于：Fujifilm Apeos 6580 / Fujifilm Apeos 7580

类型区分：以上为粉盒芯片，非鼓芯片。

粉盒芯片提示：注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。

Version Description: AP (Asia-Pacific Region), CHN (China Region), JPN (Japan Region). The above chips are compatible with: Fujifilm Apeos 6580 / Fujifilm Apeos 7580

Type Distinction: The above are toner cartridge chips, not drum chips.

Toner Cartridge Chip Reminder: Ensure the toner cartridge is completely filled with toner before replacing the chip; otherwise, the chip may fail to activate or may display an insufficient toner warning.

Anti-static Warning: When handling and installing chips (particularly in dry autumn conditions), discharge static electricity from your body first or wear an anti-static wrist strap to prevent chip damage from electrostatic discharge.

The chips produced and sold by our company are compatible aftermarket chips and have no direct affiliation with the original brand.

Version Description: AP (Asia-Pacific Region), CHN (China Region), JPN (Japan Region). The above chips are compatible with: Fujifilm Apeos 6580 / Fujifilm Apeos 7580

Type Distinction: The above are toner cartridge chips, not drum chips.

Toner Cartridge Chip Reminder: Ensure the toner cartridge is completely filled with toner before replacing the chip; otherwise, the chip may fail to activate or may display an insufficient toner warning.

Anti-static Warning: When handling and installing chips (particularly in dry autumn conditions), discharge static electricity from your body first or wear an anti-static wrist strap to prevent chip damage from electrostatic discharge.

The chips produced and sold by our company are compatible aftermarket chips and have no direct affiliation with the original brand.

颜色：MONO（黑色/单色）

版本：WW（通用版本）

类型：本参数表未标注鼓/粉，默认为芯片（无鼓芯片/粉芯片）

以上芯片适用于：Dell S2810/S2815/H815

类型区分：本参数表未标注鼓/粉，默认为芯片（无鼓芯片/粉芯片）。请根据实际安装的耗材组件确认使用。

粉盒芯片提示：如为粉盒芯片，注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

鼓芯片提示：如为硒鼓芯片，要确保硒鼓完好状态下更换，才不容易出现代码报错。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

Color: MONO (Black/Monochrome)

Version: WW (Universal Version)

Type: Not specified as drum/toner in this parameter table; defaults to chip (drum chip/toner cartridge chip)

These chips are compatible with: Dell S2810/S2815/H815

Type Identification: Not specified as drum/toner in this parameter table; defaults to chip (drum chip/toner cartridge chip). Please verify according to the actual consumable assembly installed.

Toner Cartridge Chip Note: For toner cartridge chips, ensure the cartridge is completely filled with toner before replacing the chip; otherwise, the chip may not function properly or may display insufficient supply warnings.

Drum Chip Note: For drum chips, ensure the photoconductor drum is in good condition before replacement to minimize the occurrence of error codes.

Anti-Static Warning: When handling and installing chips (especially during dry autumn conditions), discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic damage to the chip.

Color: MONO (Black/Monochrome)

Version: WW (Universal Version)

Type: Not specified as drum/toner in this parameter table; defaults to chip (drum chip/toner cartridge chip)

These chips are compatible with: Dell S2810/S2815/H815

Type Identification: Not specified as drum/toner in this parameter table; defaults to chip (drum chip/toner cartridge chip). Please verify according to the actual consumable assembly installed.

Toner Cartridge Chip Note: For toner cartridge chips, ensure the cartridge is completely filled with toner before replacing the chip; otherwise, the chip may not function properly or may display insufficient supply warnings.

Drum Chip Note: For drum chips, ensure the photoconductor drum is in good condition before replacement to minimize the occurrence of error codes.

Anti-Static Warning: When handling and installing chips (especially during dry autumn conditions), discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic damage to the chip.

以上芯片适用于：Lexmark MS711dn / MS811

Lexmark MS711dn / MS811

本说明为粉盒芯片，注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

要确保硒鼓完好状态下更换，才不容易出现代码报错。

在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

The above chip is compatible with: Lexmark MS711dn / MS811

Lexmark MS711dn / MS811

This instruction applies to a toner cartridge chip. Please ensure the toner cartridge is fully filled with toner before replacing the chip; otherwise, the chip will not take effect or the printer will prompt that the toner level is insufficient.

To avoid error codes, please ensure the imaging unit is in good condition before replacing the chip.

When handling and installing the chip (especially in dry autumn conditions), please discharge any static electricity from your body or wear an anti-static wrist strap to prevent damaging the chip.

The above chip is compatible with: Lexmark MS711dn / MS811

Lexmark MS711dn / MS811

This instruction applies to a toner cartridge chip. Please ensure the toner cartridge is fully filled with toner before replacing the chip; otherwise, the chip will not take effect or the printer will prompt that the toner level is insufficient.

To avoid error codes, please ensure the imaging unit is in good condition before replacing the chip.

When handling and installing the chip (especially in dry autumn conditions), please discharge any static electricity from your body or wear an anti-static wrist strap to prevent damaging the chip.

以上芯片适用于：HP OfficeJet Pro 9110b / 9117b / 9120r / HP OfficeJet Pro 9110 / 9125e / 9128e / 9129e / 9130b / 9135e / 9730e

版本说明：NA（北美区域版本）

本系列芯片适用机型同上，仅限列表内机型。

安装前关闭打印机电源，打开耗材仓取出对应耗材。将芯片对准卡槽方向平稳推入，确认触点完全接触后装入打印机，开机即可识别。注意芯片方向标识，避免反向安装导致触点损坏。

类型区分：当前参数未标注鼓/粉，默认为芯片（无鼓芯片/粉芯片）。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。本店经营及本公司代理品牌为“碧砚”品牌芯片。

The chips listed above are compatible with: HP OfficeJet Pro 9110b / 9117b / 9120r / HP OfficeJet Pro 9110 / 9125e / 9128e / 9129e / 9130b / 9135e / 9730e

Version Note: NA (North American Version)

The compatible printer models for this chip series are the same as listed above, limited exclusively to the models within the list.

Power off the printer before installation. Open the consumables compartment and remove the corresponding consumable. Align the chip with the slot direction and insert smoothly. Confirm that the contacts are fully engaged, then load into the printer and power on for automatic recognition. Note the chip orientation marking; avoid reverse installation to prevent contact damage.

Type Distinction: The current specifications do not indicate drum or toner units; these are chips by default (toner cartridge chips, not drum chips).

Anti-static Warning: When handling and installing chips (particularly in dry autumn environments), static electricity must be discharged from the body or anti-static wrist straps must be worn to prevent chip damage from electrostatic discharge.

The chips produced and sold by our company are compatible chips and have no direct affiliation with the original brand. Our store operates and our company distributes chips under the “Biyan” brand.

Caiyi Office Consumables: Established in 2008, the company primarily engages in printer chips, imaging drums, toner cartridges, toner powder and other accessory products.

The chips listed above are compatible with: HP OfficeJet Pro 9110b / 9117b / 9120r / HP OfficeJet Pro 9110 / 9125e / 9128e / 9129e / 9130b / 9135e / 9730e

Version Note: NA (North American Version)

The compatible printer models for this chip series are the same as listed above, limited exclusively to the models within the list.

Power off the printer before installation. Open the consumables compartment and remove the corresponding consumable. Align the chip with the slot direction and insert smoothly. Confirm that the contacts are fully engaged, then load into the printer and power on for automatic recognition. Note the chip orientation marking; avoid reverse installation to prevent contact damage.

Type Distinction: The current specifications do not indicate drum or toner units; these are chips by default (toner cartridge chips, not drum chips).

Anti-static Warning: When handling and installing chips (particularly in dry autumn environments), static electricity must be discharged from the body or anti-static wrist straps must be worn to prevent chip damage from electrostatic discharge.

The chips produced and sold by our company are compatible chips and have no direct affiliation with the original brand. Our store operates and our company distributes chips under the “Biyan” brand.

Caiyi Office Consumables: Established in 2008, the company primarily engages in printer chips, imaging drums, toner cartridges, toner powder and other accessory products.

版本：EUR（欧洲区域版本）

类型：通用芯片（未区分鼓芯片/粉芯片）

以上芯片适用于：HP OfficeJet Pro 8122e / 8125e / 8132e

类型区分：本批次芯片为通用芯片，未区分鼓芯片/粉芯片，适用上述对应耗材。

粉盒芯片提示：若芯片用于粉盒，请注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

鼓芯片提示：若芯片用于硒鼓，要确保硒鼓完好状态下更换，才不容易出现代码报错。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

Version: EUR (European Region Version)

Type: Universal Chip (No distinction between Drum Chip / Toner Cartridge Chip)

These chips are compatible with: HP OfficeJet Pro 8122e / 8125e / 8132e

Type Distinction: This batch of chips are universal chips, with no distinction between Drum Chip and Toner Cartridge Chip, applicable to the corresponding consumables listed above.

Toner Cartridge Chip Notice: If the chip is used for a toner cartridge, please ensure the cartridge is completely filled with toner before replacing the chip. Otherwise, the chip may not activate or may indicate insufficient supply.

Drum Chip Notice: If the chip is used for a drum unit, ensure the drum is in good condition when replacing the chip to minimize the occurrence of error codes.

Anti-static Warning: When handling and installing the chip (especially during dry autumn conditions), discharge static electricity from your body first or wear an anti-static wrist strap to prevent chip damage caused by electrostatic discharge (ESD).

Version: EUR (European Region Version)

Type: Universal Chip (No distinction between Drum Chip / Toner Cartridge Chip)

These chips are compatible with: HP OfficeJet Pro 8122e / 8125e / 8132e

Type Distinction: This batch of chips are universal chips, with no distinction between Drum Chip and Toner Cartridge Chip, applicable to the corresponding consumables listed above.

Toner Cartridge Chip Notice: If the chip is used for a toner cartridge, please ensure the cartridge is completely filled with toner before replacing the chip. Otherwise, the chip may not activate or may indicate insufficient supply.

Drum Chip Notice: If the chip is used for a drum unit, ensure the drum is in good condition when replacing the chip to minimize the occurrence of error codes.

Anti-static Warning: When handling and installing the chip (especially during dry autumn conditions), discharge static electricity from your body first or wear an anti-static wrist strap to prevent chip damage caused by electrostatic discharge (ESD).

版本：WW（通用版本）

以上芯片均为粉盒芯片。

以上芯片适用于：Xerox Iridesse Production Press

安装前，请确认芯片方向与卡座标识一致，沿正确方向推入直至卡紧。

本说明仅涉及粉盒芯片，不适用于鼓芯片。

更换粉盒芯片时，请确保碳粉已加满后再行安装，否则芯片可能不生效或提示数值不足。

安装时请确保硒鼓完好，以免出现代码报错。

在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

Version: WW (Universal Version)

All chips listed above are toner cartridge chips.

These chips are compatible with: Xerox Iridesse Production Press

Before installation, ensure the chip orientation matches the socket markings. Insert in the correct direction until it clicks into place.

This specification only covers toner cartridge chips and does not apply to drum chips.

When replacing a toner cartridge chip, ensure the toner is completely filled before installation. Otherwise, the chip may not function or may indicate insufficient toner levels.

Ensure the drum unit is intact during installation to prevent error codes.

When handling and installing chips (particularly in dry autumn environments), discharge static electricity from your body or wear an anti-static wrist strap to prevent chip damage.

Version: WW (Universal Version)

All chips listed above are toner cartridge chips.

These chips are compatible with: Xerox Iridesse Production Press

Before installation, ensure the chip orientation matches the socket markings. Insert in the correct direction until it clicks into place.

This specification only covers toner cartridge chips and does not apply to drum chips.

When replacing a toner cartridge chip, ensure the toner is completely filled before installation. Otherwise, the chip may not function or may indicate insufficient toner levels.

Ensure the drum unit is intact during installation to prevent error codes.

When handling and installing chips (particularly in dry autumn environments), discharge static electricity from your body or wear an anti-static wrist strap to prevent chip damage.

以上芯片适用于：HP OfficeJet Pro 8120 / 8123 / 8130 / 8133

版本：NA（北美区域）

类型区分：当前参数无鼓/粉标注，默认为芯片（无鼓芯片/粉芯片）。

粉盒芯片提示：注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

鼓芯片提示：要确保硒鼓完好状态下更换，才不容易出现代码报错。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。

The above chips are compatible with: HP OfficeJet Pro 8120 / 8123 / 8130 / 8133

Version: NA (North America region)

Type Distinction: The current specifications do not indicate drum or toner cartridge type; default is chip only (non-drum chip / toner cartridge chip).

Toner Cartridge Chip Notice: Ensure the cartridge is completely filled with toner before replacing the chip; otherwise, the chip may not activate or may display an insufficient toner level warning.

Drum Chip Notice: Ensure the drum unit is in good condition before replacing the chip to prevent error codes.

Anti-static Warning: When handling or installing chips (especially during dry autumn conditions), discharge any static electricity from your body or wear an anti-static wrist strap to prevent chip damage.

The above chips are compatible with: HP OfficeJet Pro 8120 / 8123 / 8130 / 8133

Version: NA (North America region)

Type Distinction: The current specifications do not indicate drum or toner cartridge type; default is chip only (non-drum chip / toner cartridge chip).

Toner Cartridge Chip Notice: Ensure the cartridge is completely filled with toner before replacing the chip; otherwise, the chip may not activate or may display an insufficient toner level warning.

Drum Chip Notice: Ensure the drum unit is in good condition before replacing the chip to prevent error codes.

Anti-static Warning: When handling or installing chips (especially during dry autumn conditions), discharge any static electricity from your body or wear an anti-static wrist strap to prevent chip damage.

版本：WW（通用版本）

以上芯片适用于：HP LaserJet Enterprise 5501n / 5501dn / 5502dn / X50352dn / X50452dn / MFP 5601dn / 5602f / 5602dn / 5602zfw / X52952dn / X53052dn

类型区分：本产品为粉盒芯片，不适用于硒鼓芯片或其他类型耗材。

加粉提示：注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。

鼓状态提示：如使用鼓组件，要确保硒鼓完好状态下更换，才不容易出现代码报错。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

Version: WW (Universal Version)

The above chips are compatible with: HP LaserJet Enterprise 5501n / 5501dn / 5502dn / X50352dn / X50452dn / MFP 5601dn / 5602f / 5602dn / 5602zfw / X52952dn / X53052dn

Type Identification: This product is a toner cartridge chip and is not applicable to drum chips or other types of consumables.

Toner Refill Notice: Ensure the toner cartridge is fully refilled before replacing the chip; otherwise, the chip may not function properly or may prompt insufficient toner level warnings.

Drum Unit Notice: When using a drum unit, ensure the photoconductor drum is intact before replacing the chip to minimize the occurrence of error codes.

Anti-static Warning: When handling and installing the chip (particularly during dry autumn conditions), discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic damage to the chip.

Version: WW (Universal Version)

The above chips are compatible with: HP LaserJet Enterprise 5501n / 5501dn / 5502dn / X50352dn / X50452dn / MFP 5601dn / 5602f / 5602dn / 5602zfw / X52952dn / X53052dn

Type Identification: This product is a toner cartridge chip and is not applicable to drum chips or other types of consumables.

Toner Refill Notice: Ensure the toner cartridge is fully refilled before replacing the chip; otherwise, the chip may not function properly or may prompt insufficient toner level warnings.

Drum Unit Notice: When using a drum unit, ensure the photoconductor drum is intact before replacing the chip to minimize the occurrence of error codes.

Anti-static Warning: When handling and installing the chip (particularly during dry autumn conditions), discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic damage to the chip.

以上芯片适用于：Pantum BP2300/BP2300NW/BP2300W/BM2300/BM2300W/BM2300NW/BM2300A/BM2300AW/BP2309W/BM2309W/BM2309AW

注意：本产品为鼓芯片，并非粉盒芯片。更换时需确认硒鼓感光鼓及废粉仓状态完好，否则易触发打印机故障代码。

防静电警告：安装及操作过程中（尤其秋冬干燥环境），请先触摸金属导体释放人体静电，或佩戴防静电手环，以防静电击穿芯片电路。

版权声明：本公司生产/销售的碧砚芯片为兼容芯片，与原装品牌（Pantum/奔图等）并无直接关联。

This chip is compatible with: Pantum BP2300/BP2300NW/BP2300W/BM2300/BM2300W/BM2300NW/BM2300A/BM2300AW/BP2309W/BM2309W/BM2309AW

Note: This product is a drum chip, not a toner cartridge chip. When replacing, please ensure that the photoconductor drum and waste toner container are in good condition; otherwise, printer error codes may be triggered.

Anti-static Warning: During installation and operation (especially in dry autumn/winter environments), please touch a metal conductor to discharge static electricity from your body, or wear an anti-static wrist strap to prevent electrostatic discharge from damaging the chip circuitry.

Copyright Notice: The Biyan chips produced or sold by our company are compatible chips and have no direct affiliation with the original brand (Pantum, etc.).

This chip is compatible with: Pantum BP2300/BP2300NW/BP2300W/BM2300/BM2300W/BM2300NW/BM2300A/BM2300AW/BP2309W/BM2309W/BM2309AW

Note: This product is a drum chip, not a toner cartridge chip. When replacing, please ensure that the photoconductor drum and waste toner container are in good condition; otherwise, printer error codes may be triggered.

Anti-static Warning: During installation and operation (especially in dry autumn/winter environments), please touch a metal conductor to discharge static electricity from your body, or wear an anti-static wrist strap to prevent electrostatic discharge from damaging the chip circuitry.

Copyright Notice: The Biyan chips produced or sold by our company are compatible chips and have no direct affiliation with the original brand (Pantum, etc.).

参数说明：

• 品牌：指芯片适配的打印机品牌。本产品适用于OKI（冲电气）品牌设备。
• 型号：芯片产品型号为OKI471S-TW04。
• 适用机型：OKI 471S激光打印机。
• 颜色：MONO表示黑色（单色打印）。
• 容量：7K表示标准打印张数约7000页（基于ISO/IEC 19752标准测试）。
• 版本：TW表示台湾地区适用版本。芯片版本需与打印机固件版本匹配，否则可能导致计数不准确或无法识别。

使用注意事项：

• 本产品为兼容芯片，与原装品牌无直接关联。
• 如为粉盒芯片：更换芯片前请确保碳粉已加满，否则芯片可能不生效或显示数值不满。
• 如为硒鼓芯片：请确保硒鼓组件完好无损后再行更换，以防止出现错误代码。

Parameter Description:

• Brand: Refers to the printer brand compatible with the chip. This product is compatible with OKI (Oki Electric) brand devices.
• Model: The chip product model is OKI471S-TW04.
• Compatible Models: OKI 471S laser printer.
• Color: MONO indicates black (monochrome printing).
• Capacity: 7K indicates approximately 7,000 standard print pages (based on ISO/IEC 19752 standard testing).
• Version: TW indicates the Taiwan region version. The chip version must match the printer firmware version; otherwise, it may cause inaccurate counting or recognition failure.

Usage Notes:

• This product is a compatible chip and is not directly associated with the original brand.
• If it is a toner cartridge chip: Please ensure the toner is fully refilled before replacing the chip, otherwise the chip may not take effect or display an insufficient value.
• If it is a drum chip: Please ensure the drum unit is intact before replacement to prevent error codes.

适用机型：HP LaserJet Pro 4006n / 4006dn / 4006dw / MFP 4112dw / 4112fdn / 4112fdw

适用品牌：HP / 惠普

本产品为粉盒芯片，请确保碳粉盒加满碳粉后再进行芯片更换。若碳粉未加满即更换芯片，可能导致芯片无法正常生效或设备提示碳粉量不足。

本公司生产的芯片为兼容芯片，与原装品牌并无直接关联。

适用机型：以上芯片仅适用于 HP LaserJet Pro 4007n / 4007dn / 4007dw / MFP 4113dw / 4113fdn / 4113fdw，请勿用于其他机型。

颜色：MONO（黑白激光打印）

更换鼓芯片时，必须确保硒鼓单元物理状态完好，无严重磨损、感光鼓划伤或显影组件脏污。若在硒鼓异常情况下更换芯片，设备可能无法正常初始化或持续出现硬件故障代码（如 50.1、51 等错误）。芯片本身不参与成像过程，不影响打印质量。

版权声明：本公司生产的芯片为兼容芯片，与原装品牌并无直接关联。\n

公司介绍：

彩一办公耗材，公司成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。

Compatible Models: These chips are exclusively compatible with HP LaserJet Pro 4007n / 4007dn / 4007dw / MFP 4113dw / 4113fdn / 4113fdw. Do not use on other models.

Color: MONO (Black & White Laser Printing)

When replacing the drum chip, ensure the imaging drum unit is in good physical condition, free from severe wear, photoconductor drum scratches, or developer unit contamination. If the chip is replaced while the imaging drum is in abnormal condition, the device may fail to initialize properly or continuously display hardware fault codes (such as errors 50.1, 51, etc.). The chip itself does not participate in the imaging process and has no impact on print quality.

Copyright Notice: The chips manufactured by our company are compatible products and are not directly affiliated with the original brand.

参数说明

• 容量：3K表示标准容量（约3,000页），10K表示高容量（约10,000页），基于ISO/IEC 19752标准5%覆盖率测试。
• 颜色：MONO表示单色/黑色打印芯片。
• 版本：CHN/IND为中国及印度地区版本，仅适用于对应市场销售的对应机型。

使用须知

本芯片为兼容芯片，与原装品牌并无直接关联。安装更换时，请确保对应硒鼓或粉盒组件完好无损，无泄漏或严重磨损，以避免芯片无法识别或初始化失败。芯片安装后需执行打印机自检或重置程序完成配对。

Specifications

• Capacity: 3K denotes standard capacity (approx. 3,000 pages), while 10K denotes high capacity (approx. 10,000 pages), tested in accordance with ISO/IEC 19752 standard at 5% coverage.
• Color: MONO indicates monochrome/black print chip.
• Version: CHN/IND refers to the China and India regional version, applicable only to models sold in the corresponding markets.

Usage Instructions

This chip is a compatible chip and is not directly affiliated with the original brand. When installing or replacing, ensure the corresponding toner cartridge or drum unit is intact, with no leakage or severe wear, to avoid chip recognition failure or initialization failure. After installation, the printer must perform a self-test or reset procedure to complete pairing.