参数
以上芯片适用于：HP OfficeJet Pro 8120 / 8123 / 8130 / 8133
版本：NA（北美区域）
使用方法
安装前请关闭打印机电源并拔掉电源线。取下墨盒上的旧芯片，将新芯片的触点端朝向墨盒对应的插槽方向，沿引导槽平稳推入，直至芯片两侧卡扣自动复位锁紧。确认安装牢固后，接通电源开机使用。
使用注意
类型区分：当前参数无鼓/粉标注，默认为芯片（无鼓芯片/粉芯片）。
粉盒芯片提示：注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。
鼓芯片提示：要确保硒鼓完好状态下更换，才不容易出现代码报错。
防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。
版权声明
本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。
公司介绍
彩一办公耗材，公司成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。
Specifications
The above chips are compatible with: HP OfficeJet Pro 8120 / 8123 / 8130 / 8133
Version: NA (North America region)
Installation Instructions
Before installation, please power off the printer and unplug the power cord. Remove the old chip from the cartridge. Align the contact end of the new chip with the corresponding slot on the cartridge, and insert it smoothly along the guide rail until the locking clips on both sides of the chip automatically snap back and lock into place. Confirm the installation is secure, then power on the printer.
Usage Notes
Type Distinction: The current specifications do not indicate drum or toner cartridge type; default is chip only (non-drum chip / toner cartridge chip).
Toner Cartridge Chip Notice: Ensure the cartridge is completely filled with toner before replacing the chip; otherwise, the chip may not activate or may display an insufficient toner level warning.
Drum Chip Notice: Ensure the drum unit is in good condition before replacing the chip to prevent error codes.
Anti-static Warning: When handling or installing chips (especially during dry autumn conditions), discharge any static electricity from your body or wear an anti-static wrist strap to prevent chip damage.
Copyright Notice
The chips produced and sold by our company are compatible chips and are not directly affiliated with the original brand.
Company Profile
Caiyi Office Consumables. Founded in 2008, the company primarily engages in printer chips, toner cartridges, ink cartridges, toner powder, and other consumable accessory businesses.
#打印机芯片,碧砚,HP,923XL,墨盒芯片,耗材
Specifications
The above chips are compatible with: HP OfficeJet Pro 8120 / 8123 / 8130 / 8133
Version: NA (North America region)
Installation Instructions
Before installation, please power off the printer and unplug the power cord. Remove the old chip from the cartridge. Align the contact end of the new chip with the corresponding slot on the cartridge, and insert it smoothly along the guide rail until the locking clips on both sides of the chip automatically snap back and lock into place. Confirm the installation is secure, then power on the printer.
Usage Notes
Type Distinction: The current specifications do not indicate drum or toner cartridge type; default is chip only (non-drum chip / toner cartridge chip).
Toner Cartridge Chip Notice: Ensure the cartridge is completely filled with toner before replacing the chip; otherwise, the chip may not activate or may display an insufficient toner level warning.
Drum Chip Notice: Ensure the drum unit is in good condition before replacing the chip to prevent error codes.
Anti-static Warning: When handling or installing chips (especially during dry autumn conditions), discharge any static electricity from your body or wear an anti-static wrist strap to prevent chip damage.
Copyright Notice
The chips produced and sold by our company are compatible chips and are not directly affiliated with the original brand.
Company Profile
Caiyi Office Consumables. Founded in 2008, the company primarily engages in printer chips, toner cartridges, ink cartridges, toner powder, and other consumable accessory businesses.
