参数
以上芯片适用于：Pantum BP2300/BP2300NW/BP2300W/BM2300/BM2300W/BM2300NW/BM2300A/BM2300AW/BP2309W/BM2309W/BM2309AW
使用方法
- 关闭打印机电源，打开前盖取出硒鼓组件。
- 将旧鼓芯片从硒鼓上垂直撬下，清理残留胶迹。
- 撕去新芯片背面 protective 胶纸，对齐卡槽按压粘贴牢固。
- 装回硒鼓，关闭前盖，开机执行初始化复位。
使用注意
注意：本产品为鼓芯片，并非粉盒芯片。更换时需确认硒鼓感光鼓及废粉仓状态完好，否则易触发打印机故障代码。
防静电警告：安装及操作过程中（尤其秋冬干燥环境），请先触摸金属导体释放人体静电，或佩戴防静电手环，以防静电击穿芯片电路。
版权声明
版权声明：本公司生产/销售的碧砚芯片为兼容芯片，与原装品牌（Pantum/奔图等）并无直接关联。
公司介绍
彩一办公耗材，公司成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。
Specifications
This chip is compatible with: Pantum BP2300/BP2300NW/BP2300W/BM2300/BM2300W/BM2300NW/BM2300A/BM2300AW/BP2309W/BM2309W/BM2309AW
Installation Instructions
- Power off the printer, open the front cover, and remove the drum assembly.
- Pry the old drum chip off the drum unit vertically, then clean any residual adhesive.
- Peel off the protective backing from the new chip, align it with the mounting slot, and press firmly to secure.
- Reinstall the drum unit, close the front cover, power on the printer, and perform an initialization reset.
Precautions
Note: This product is a drum chip, not a toner cartridge chip. When replacing, please ensure that the photoconductor drum and waste toner container are in good condition; otherwise, printer error codes may be triggered.
Anti-static Warning: During installation and operation (especially in dry autumn/winter environments), please touch a metal conductor to discharge static electricity from your body, or wear an anti-static wrist strap to prevent electrostatic discharge from damaging the chip circuitry.
Copyright Notice
Copyright Notice: The Biyan chips produced or sold by our company are compatible chips and have no direct affiliation with the original brand (Pantum, etc.).
Company Profile
Caiyi Office Consumables was established in 2008. Our main business involves printer chips, drum units, toner cartridges, toner powder, and other related accessory products.
#打印机芯片,碧砚,奔图,硒鼓芯片
Specifications
This chip is compatible with: Pantum BP2300/BP2300NW/BP2300W/BM2300/BM2300W/BM2300NW/BM2300A/BM2300AW/BP2309W/BM2309W/BM2309AW
Installation Instructions
- Power off the printer, open the front cover, and remove the drum assembly.
- Pry the old drum chip off the drum unit vertically, then clean any residual adhesive.
- Peel off the protective backing from the new chip, align it with the mounting slot, and press firmly to secure.
- Reinstall the drum unit, close the front cover, power on the printer, and perform an initialization reset.
Precautions
Note: This product is a drum chip, not a toner cartridge chip. When replacing, please ensure that the photoconductor drum and waste toner container are in good condition; otherwise, printer error codes may be triggered.
Anti-static Warning: During installation and operation (especially in dry autumn/winter environments), please touch a metal conductor to discharge static electricity from your body, or wear an anti-static wrist strap to prevent electrostatic discharge from damaging the chip circuitry.
Copyright Notice
Copyright Notice: The Biyan chips produced or sold by our company are compatible chips and have no direct affiliation with the original brand (Pantum, etc.).
Company Profile
Caiyi Office Consumables was established in 2008. Our main business involves printer chips, drum units, toner cartridges, toner powder, and other related accessory products.