新北洋 58D3H0K-W 粉盒芯片参数与使用指南

参数

品牌 型号 颜色 容量 版本 类型
SNBC/新北洋 58D3H0K-W MONO 15K CHN

版本:CHN(中国区域版本)

以上芯片适用于:新北洋 KMS8WB

适用机型

同上

使用方法

  1. 关闭打印机电源,打开硒鼓或粉盒仓。
  2. 取出旧芯片,确认方向后插入新芯片,确保触点接触良好。
  3. 合上仓盖,开机自检完成。

使用注意

类型区分:本产品为粉盒芯片。

粉盒芯片提示:注意加满碳粉后再更换芯片,否则芯片不生效或会提示数值不满。

防静电警告:在使用和安装芯片时(特别是秋天干燥环境),需要先去除人体静电或佩戴防静电手环,以防击穿芯片。

版权声明

本店经营及本公司代理品牌为“碧砚”品牌芯片。本公司生产/销售的芯片为兼容芯片,与原装品牌并无直接关联。

公司介绍

彩一办公耗材,公司成立于2008年,主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。

Parameters

Brand Model Color Capacity Version Type
SNBC/New Bei Yang 58D3H0K-W MONO 15K CHN Toner

Version: CHN (China Region Version)

This chip is applicable to: SNBC KMS8WB

Applicable Models

Same as above

Usage Instructions

  1. Turn off the printer power and open the drum or toner cartridge compartment.
  2. Remove the old chip, insert the new chip after confirming the direction, and ensure good contact between the terminals.
  3. Close the compartment cover and turn on the printer to complete the self-test.

Usage Notes

Type Distinction: This product is a toner cartridge chip.

Toner Cartridge Chip Note: Ensure the toner is fully refilled before replacing the chip; otherwise, the chip may not function or may indicate an insufficient fill level.

Static Electricity Warning: When handling and installing the chip (especially during dry autumn conditions), discharge static electricity from the human body first or wear an anti-static wrist strap to prevent chip damage from electrostatic discharge.

Copyright Statement

Our store operates and our company distributes the “Biyan” brand chips. The chips produced and sold by our company are compatible chips and are not directly associated with the original brand.

Company Introduction

Caiyi Office Consumables. Founded in 2008, our primary business involves printer chips, drums, toner cartridges, toner and other accessory products.


#打印机芯片,碧砚,新北洋,耗材


🛍️ 欢迎访问彩一办公耗材淘宝店

Parameters

Brand Model Color Capacity Version Type
SNBC/New Bei Yang 58D3H0K-W MONO 15K CHN Toner

Version: CHN (China Region Version)

This chip is applicable to: SNBC KMS8WB

Applicable Models

Same as above

Usage Instructions

  1. Turn off the printer power and open the drum or toner cartridge compartment.
  2. Remove the old chip, insert the new chip after confirming the direction, and ensure good contact between the terminals.
  3. Close the compartment cover and turn on the printer to complete the self-test.

Usage Notes

Type Distinction: This product is a toner cartridge chip.

Toner Cartridge Chip Note: Ensure the toner is fully refilled before replacing the chip; otherwise, the chip may not function or may indicate an insufficient fill level.

Static Electricity Warning: When handling and installing the chip (especially during dry autumn conditions), discharge static electricity from the human body first or wear an anti-static wrist strap to prevent chip damage from electrostatic discharge.

Copyright Statement

Our store operates and our company distributes the “Biyan” brand chips. The chips produced and sold by our company are compatible chips and are not directly associated with the original brand.

Company Introduction

Caiyi Office Consumables. Founded in 2008, our primary business involves printer chips, drums, toner cartridges, toner and other accessory products.


🛍️ Visit Our Official Store on Taobao