产品概述
碧砚品牌兼容芯片，适配 HP LaserJet MFP M42625 系列黑白激光多功能一体机。本批次涵盖 W1337S、W1337X、W1337XH 三款粉盒芯片（碳粉盒复位芯片），供专业人员选型参考。
参数明细
参数说明
- 型号后缀含义：S 通常对应标准容量，X 对应高容量，XH 对应超高容量。其中 W1337XH 标称印量约 13,700 页，约为标准型号的两倍。
- 颜色：MONO 表示单色（黑色），该系列仅适用于黑白打印，不可用于彩色机型。
- 容量：容量指芯片标称可复位页数（K = 千页），实际印量受覆盖率、打印介质等因素影响，存在合理偏差。
- 版本：当前版本信息尚未明确（表格中以「待确认」标注）。常见版本标识如 WW（全球通用版）、NA（北美版）、EU（欧洲版）等。建议下单前与供应商确认具体区域版本，避免固件兼容性问题。
- 类型：本批为粉盒芯片（碳粉盒复位芯片），非鼓芯片。
⚠️ 粉盒芯片重要提示：更换芯片前，请务必先将碳粉盒加满碳粉，再安装新芯片。若粉盒内碳粉余量不足即更换芯片，芯片上机后可能无法正确复位、或提示碳粉量不满，导致芯片失效。
兼容性说明
本芯片仅适用于上述表格所列 HP LaserJet MFP M42625dn 与 M42625n 两款机型，不可通用于其他未列明型号。安装前请核对打印机型号，避免不兼容造成的报错或无法识别。
版权声明
碧砚品牌所生产的芯片为第三方兼容芯片，与原装品牌（HP/惠普）无直接关联，亦未经原厂授权。产品仅用于维修与耗材再生场景，不涉及原装商标侵权使用。
彩一办公耗材，成立于 2008 年，长期专注于打印机芯片、硒鼓、粉盒、碳粉等打印耗材配件的研发与销售，为行业客户提供稳定的兼容耗材方案。
#碧砚芯片,HP芯片,W1337,粉盒芯片,打印机耗材,M42625
Product Overview
Bichip brand compatible chips, designed for the HP LaserJet MFP M42625 series black-and-white laser multifunction printer. This batch covers three toner cartridge chip (toner cartridge reset chip) models — W1337S, W1337X, and W1337XH — serving as a reference for professional users during model selection.
Specifications
Parameter Notes
- Model Suffix Meaning: “S” typically denotes standard yield, “X” denotes high yield, and “XH” denotes extra-high yield. The W1337XH has a nominal page yield of approximately 13,700 pages, roughly twice that of the standard model.
- Color: MONO indicates monochrome (black). This series supports black-and-white printing only and is not compatible with color printer models.
- Yield: Yield refers to the nominal resettable page count of the chip (K = thousand pages). Actual page yield may vary depending on coverage rate, print media, and other factors; reasonable deviations are to be expected.
- Version: The current version information has not yet been confirmed (marked as “TBD” in the table). Common version identifiers include WW (Worldwide), NA (North America), EU (Europe), etc. It is advisable to confirm the specific regional version with the supplier before placing an order to avoid firmware compatibility issues.
- Type: This batch consists of toner cartridge chips (toner cartridge reset chips), not drum chips.
⚠️ Important Note for Toner Cartridge Chips: Before replacing the chip, always refill the toner cartridge with toner powder first, and only then install the new chip. If the chip is replaced while the toner level inside the cartridge is insufficient, the chip may fail to reset correctly after installation or may indicate that the toner level is not full, rendering the chip ineffective.
Compatibility Statement
This chip is only compatible with the two models listed in the table above — the HP LaserJet MFP M42625dn and M42625n. It is not interchangeable with any other models not specified. Please verify your printer model before installation to avoid errors or recognition failures caused by incompatibility.
Copyright Notice
The chips manufactured under the Bichip brand are third-party compatible chips. They have no direct affiliation with the original brand (HP) and are not authorized by the original manufacturer. These products are intended solely for repair and consumable remanufacturing scenarios and do not involve any infringing use of original trademarks.
Colorone Office Consumables, founded in 2008, has long been dedicated to the R&D and sales of printer chips, toner cartridges, toner powder, and other printing consumable components and accessories, delivering stable compatible consumable solutions to industry clients.