碧砚CTL-C2100粉盒芯片参数说明
适用品牌：Pantum/奔图
适用机型：CP2100D / CP2100DN / CP2100DW / CM2100DN / CM2100DW / CM2100AD / WCM2100ADN
版本标识：EXCHN（区域限定版本）
芯片类型：粉盒计数芯片
参数与版本说明
- 容量标识：表中标称容量（如1.5K/3K）为A4幅面5%覆盖率下的理论打印页数。实际输出量受打印内容覆盖率、设备节能设置及环境温湿度影响，数据仅供技术参考。
- 版本区域（EXCHN）：版本代码用于匹配打印机主板固件的区域限制。EXCHN为特定区域/渠道版本标识，安装前请核对打印机固件区域与该芯片版本一致。跨区域或跨版本混用可能导致设备无法识别耗材或触发区域锁定代码。
- 排序规则：参数表已按统一版本（EXCHN）归类，并严格遵循K（黑）、C（青）、M（品红）、Y（黄）顺序排列，标准容量与高容量分组列出，便于仓储核对与采购。
安装与使用注意事项
本系列为粉盒计数芯片。更换芯片前，务必确保粉盒内碳粉已加满或更换为全新满粉粉盒。若在碳粉余量不足、未清理废粉或粉盒未摇匀的情况下直接更换新芯片，芯片将无法完成初始化握手，设备可能提示“碳粉量不满”、“耗材寿命未重置”或拒绝执行打印任务。
芯片金属触点安装时需保持清洁干燥，对准粉盒卡槽平推入位，避免斜插或强行按压导致触点引脚变形。安装完毕后请重启打印机，以便主板重新读取耗材计数数据。
版权与品牌声明
本产品为碧砚品牌兼容芯片，旨在提供稳定的耗材计数与识别功能。本公司生产的芯片为兼容芯片，与原装品牌并无直接关联。产品参数及兼容性数据基于实验室测试与市面流通机型验证，仅限用于列表内指定机型，请勿擅自改装或跨机型使用。
公司介绍
彩一办公耗材，公司成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。
#打印机芯片,奔图耗材,粉盒芯片,碧砚芯片,办公耗材
Biyan CTL-C2100 Toner Cartridge Chip Specifications
Compatible Brands: Pantum
Compatible Models: CP2100D / CP2100DN / CP2100DW / CM2100DN / CM2100DW / CM2100AD / WCM2100ADN
Version Code: EXCHN (Region-Limited Version)
Chip Type: Toner Cartridge Counting Chip
Specifications and Version Description
- Capacity Designation: The rated capacity listed in the table (e.g., 1.5K/3K) represents the theoretical page yield at 5% coverage on A4 paper. Actual output may vary based on print content coverage, device energy-saving settings, and ambient temperature and humidity. Data is for technical reference only.
- Version Region (EXCHN): The version code is used to match the regional restrictions of the printer mainboard firmware. EXCHN is a specific region/channel version identifier. Before installation, please verify that the printer firmware region matches the chip version. Cross-region or cross-version mixing may cause the device to fail to recognize consumables or trigger region lock codes.
- Sorting Rules: The parameter table is classified under a unified version (EXCHN) and strictly follows the order of K (Black), C (Cyan), M (Magenta), and Y (Yellow). Standard capacity and high capacity are listed in separate groups for easy warehouse verification and procurement.
Installation and Usage Precautions
This series consists of toner cartridge counting chips. Before replacing the chip, ensure that the toner cartridge is fully filled with toner or replace it with a brand new full toner cartridge. If a new chip is installed under conditions of insufficient toner, uncleaned waste toner, or unevenly distributed toner in the cartridge, the chip will be unable to complete the initialization handshake. The device may prompt “Insufficient Toner,” “Consumable Life Not Reset,” or refuse to execute print jobs.
The chip metal contacts must remain clean and dry during installation. Align with the toner cartridge slot and push in straight; avoid angled insertion or forced pressing that may deform contact pins. After installation, restart the printer to allow the mainboard to re-read the consumable counting data.
Copyright and Brand Declaration
This product is a Biyan brand compatible chip designed to provide stable consumable counting and identification functions. The chips produced by our company are compatible chips and have no direct affiliation with the original brand. Product parameters and compatibility data are based on laboratory testing and verification of commercially available models, and are limited to the specified models listed. Do not modify or use across different models without authorization.
Company Introduction
Caiyi Office Consumables was founded in 2008. The company is mainly engaged in printer chips, imaging drums, toner cartridges, toner powder, and other accessory businesses.
