产品参数
品牌：HP Ink/惠普（喷墨系列）
适用机型：HP OfficeJet Pro 8120 / 8123 / 8130
版本区域：AP（Asia Pacific，亚太区域版本）
芯片品牌：碧砚
类型：喷墨墨盒芯片
参数说明
- 型号：对应HP原装墨盒零件编号（PA编号），用于标识具体墨盒规格及颜色。
- 颜色：K=黑色（Black）、C=青色（Cyan）、M=品红（Magenta）、Y=黄色（Yellow），四色分体墨盒各自独立芯片。
- 容量：1K表示黑色墨盒标称印量约1000页，0.8K表示彩色单色墨盒标称印量约800页（基于A4幅面5%覆盖率测试标准，实际印量因打印内容而异）。
- 版本（AP）：AP为Asia Pacific缩写，表示该芯片适配亚太区域销售的机型固件编码。不同区域版本（如WW通用版、NA北美版等）芯片编码存在差异，跨区域使用可能出现不识别情况，请确认设备所属区域后选用。
安装注意事项
本芯片为喷墨墨盒芯片，安装时请注意以下事项：
- 更换芯片前，请确保墨盒内墨水已加满。墨水不足时更换芯片，可能导致芯片无法被打印机正确识别，或出现墨量显示不满、提示缺墨等异常。
- 请将芯片安装至对应颜色位置的墨盒上（K/C/M/Y），错位安装会导致打印机报错或输出色彩异常。
- 安装时请保持芯片金属触点清洁，避免手指直接接触触点，防止静电或污渍影响识别。
- 本芯片仅适用于上表所列 HP OfficeJet Pro 8120 / 8123 / 8130 机型，不适用于其他型号打印机。
版权声明
本公司生产的芯片为兼容芯片，与原装品牌（HP/惠普）并无直接关联。文中涉及的品牌名称、型号编号仅用于产品识别与适配参考，相关商标归原权利人所有。
关于彩一办公耗材
彩一办公耗材成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。本系列芯片为碧砚品牌产品，由彩一办公耗材提供技术支持与销售服务。
#碧砚芯片,惠普喷墨,OfficeJet Pro 8120,兼容墨盒芯片
Product Specifications
Brand: HP Ink / HP (Inkjet Series)
Compatible Models: HP OfficeJet Pro 8120 / 8123 / 8130
Region Version: AP (Asia Pacific)
Chip Brand: Biyan (碧砚)
Type: Inkjet Cartridge Chip
Parameter Description
- Part Number: Corresponds to the HP OEM cartridge part number (PA number), used to identify specific cartridge specifications and colors.
- Color: K = Black, C = Cyan, M = Magenta, Y = Yellow. The four-color individual cartridge system uses a separate independent chip for each color.
- Yield: 1K indicates the black cartridge has a rated page yield of approximately 1,000 pages; 0.8K indicates each color cartridge has a rated page yield of approximately 800 pages (based on A4 format at 5% coverage test standard; actual yield may vary depending on print content).
- Region (AP): AP stands for Asia Pacific, indicating that this chip is compatible with the firmware coding of printers sold in the Asia Pacific region. Chips for different regions (e.g., WW for Worldwide, NA for North America, etc.) have different coding. Cross-region use may result in recognition failure. Please confirm the region of your device before selecting the appropriate chip.
Installation Notes
This chip is designed for inkjet cartridges. Please observe the following precautions during installation:
- Before replacing the chip, ensure the cartridge is fully filled with ink. Replacing the chip when ink is insufficient may cause the chip to not be properly recognized by the printer, or result in abnormal readings such as incomplete ink level display or low-ink warnings.
- Install the chip on the cartridge corresponding to the correct color position (K/C/M/Y). Incorrect placement will cause printer errors or abnormal color output.
- Keep the metal contacts on the chip clean during installation. Avoid touching the contacts with your fingers to prevent static electricity or contamination from affecting recognition.
- This chip is only compatible with the HP OfficeJet Pro 8120 / 8123 / 8130 models listed above and is not suitable for other printer models.
Copyright Notice
The chips produced by our company are compatible chips and are not directly affiliated with the OEM brand (HP). Brand names and model numbers mentioned herein are used solely for product identification and compatibility reference. All related trademarks are the property of their respective owners.
About Caiyi Office Consumables
Founded in 2008, Caiyi Office Consumables specializes in printer chips, drum units, toner cartridges, toner powder, and other printer accessories. This chip series is a Biyan (碧砚) brand product, with technical support and sales services provided by Caiyi Office Consumables.