品牌与适用机型：以上芯片适用于立思辰（LANXUM）品牌，适配机型为 GM8560cdn，请确认设备型号后选用。

版本说明：本批次芯片版本均为 CHN（中国区版本），针对在中国大陆地区销售的该机型设计，请根据设备销售地区选择对应版本。

参数说明：

• 型号命名规则：TL-8588X 中末位字母代表对应颜色，K=黑色（Black）、C=青色（Cyan）、M=品红（Magenta）、Y=黄色（Yellow）。
• 容量数值：表示芯片在正常使用条件下的理论计数页数，其中”K”代表千页（Kilo pages）。黑色芯片理论容量为40,000页，彩色芯片理论容量为24,000页。实际寿命受打印覆盖率、环境条件及设备使用频率等因素影响。
• 本产品为鼓芯片，用于硒鼓组件计数，非粉盒芯片，不涉及碳粉量检测。

使用注意事项：

• 本产品为鼓芯片，更换时需确保硒鼓组件完好、无物理损伤、无严重磨损。在硒鼓异常状态下更换芯片可能导致设备报错代码或计数不准。
• 芯片安装后需正常执行打印任务以完成初始化，避免在未完成初始化前断电或频繁开关机。
• 如设备提示硒鼓错误或计数异常，请先确认硒鼓状态良好，检查芯片触点是否清洁，重新安装后再试。

Brand and Compatible Models: The above chips are compatible with LANXUM brand printers, specifically model GM8560cdn. Please verify your device model before purchasing.

Version Information: Chips in this batch are CHN (China region version), designed for units sold in mainland China. Please select the appropriate version based on the sales region of your device.

Specifications Notes:

• Model Naming Convention: In the TL-8588X designation, the final letter indicates the corresponding color: K=Black, C=Cyan, M=Magenta, Y=Yellow.
• Page Yield: Represents the theoretical number of pages under normal usage conditions, where “K” denotes thousand (Kilo) pages. Black chips have a theoretical yield of 40,000 pages, while color chips have a theoretical yield of 24,000 pages. Actual lifespan may vary depending on print coverage, environmental conditions, and device usage frequency.
• This product is a drum chip used for drum unit counting. It is not a toner cartridge chip and does not perform toner level detection.

Usage Precautions:

• This product is a drum chip. When replacing, ensure the drum unit is intact, free from physical damage, and not severely worn. Replacing the chip while the drum unit is in abnormal condition may cause device error codes or inaccurate counting.
• After chip installation, normal print operations must be performed to complete initialization. Avoid powering off or frequently cycling power before initialization is complete.
• If the device indicates a drum error or counting abnormality, please first confirm the drum unit is functioning properly, check that the chip contacts are clean, reinstall the chip, and test again.