参数
版本：NA（北美地区）
类型：粉盒芯片
适用原装机品牌：Brother/兄弟
以上芯片适用于：Brother MFC-L8730CDW / L8930CDW / L8970CDW / EX575
适用机型
本组芯片适用机型同参数模块所列：Brother MFC-L8730CDW / L8930CDW / L8970CDW / EX575。
使用方法
- 核对芯片型号与打印机机型，确认版本（NA）一致。
- 关闭打印机电源，取出粉盒，找到旧芯片安装位。
- 查看旧芯片朝向，将碧砚 TN-635X 芯片按正确方向插入卡槽，确保芯片触点与插座接触到位。
- 装回粉盒，开启打印机，执行自检。
使用注意
当前说明的是粉盒芯片，不是鼓芯片。
更换粉盒芯片前，请先加满碳粉再更换芯片，否则芯片不生效或会提示数值不满。
如涉及鼓芯片更换，要确保硒鼓完好状态下更换，才不容易出现代码报错。
在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。
版权声明
本店经营及本公司代理品牌为“碧砚”品牌芯片。本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。
公司介绍
彩一办公耗材，公司成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。
Parameters
Version: NA (North America Region)
Type: Toner Cartridge Chip
Applicable Original Brand: Brother
The above chips are compatible with the following Brother printer models: MFC-L8730CDW / L8930CDW / L8970CDW / EX575.
Compatible Printer Models
The compatible printer models for this set of chips are identical to those listed in the Parameters section: Brother MFC-L8730CDW / L8930CDW / L8970CDW / EX575.
Usage Instructions
- Verify that the chip model matches your printer model, and confirm that the version (NA) is consistent.
- Power off the printer, remove the toner cartridge, and locate the installation slot of the old chip.
- Check the orientation of the old chip, insert the Biyan TN-635X series chip into the slot in the correct direction, and ensure the chip contacts are fully seated with the socket.
- Reinstall the toner cartridge, power on the printer, and run a printer self-test.
Usage Precautions
The chip described in this guide is a toner cartridge chip, not an imaging drum chip.
Before replacing the toner cartridge chip, please fully refill the toner cartridge with carbon toner first. Otherwise, the chip will fail to take effect, or the printer will prompt a low yield warning.
If you need to replace the imaging drum chip, please ensure the imaging drum is intact before replacement to avoid triggering printer error codes.
When handling and installing chips (especially in dry autumn environments), please first discharge static electricity from your body or wear an anti-static wrist strap to prevent the chip from being damaged by electrostatic discharge.
Copyright Statement
Our store and our company’s agency brand is "Biyan" brand chips. The chips produced and sold by our company are compatible chips, which have no direct affiliation with the original brand.
Company Introduction
Caiyi Office Consumables was established in 2008. Its main business covers printer chips, imaging drums, toner cartridges, carbon toner and other related consumable accessories.
#打印机芯片,碧砚,TN-635X,兄弟,兼容耗材
参数
版本：NA（北美地区）
类型：粉盒芯片
适用原装机品牌：Brother/兄弟
以上芯片适用于：Brother MFC-L8730CDW / L8930CDW / L8970CDW / EX575
适用机型
本组芯片适用机型同参数模块所列：Brother MFC-L8730CDW / L8930CDW / L8970CDW / EX575。
使用方法
- 核对芯片型号与打印机机型，确认版本（NA）一致。
- 关闭打印机电源，取出粉盒，找到旧芯片安装位。
- 查看旧芯片朝向，将碧砚 TN-635X 芯片按正确方向插入卡槽，确保芯片触点与插座接触到位。
- 装回粉盒，开启打印机，执行自检。
使用注意
当前说明的是粉盒芯片，不是鼓芯片。
更换粉盒芯片前，请先加满碳粉再更换芯片，否则芯片不生效或会提示数值不满。
如涉及鼓芯片更换，要确保硒鼓完好状态下更换，才不容易出现代码报错。
在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。
版权声明
本店经营及本公司代理品牌为“碧砚”品牌芯片。本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。
公司介绍
彩一办公耗材，公司成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。
Parameters
Version: NA (North America Region)
Type: Toner Cartridge Chip
Applicable Original Brand: Brother
The above chips are compatible with the following Brother printer models: MFC-L8730CDW / L8930CDW / L8970CDW / EX575.
Compatible Printer Models
The compatible printer models for this set of chips are identical to those listed in the Parameters section: Brother MFC-L8730CDW / L8930CDW / L8970CDW / EX575.
Usage Instructions
- Verify that the chip model matches your printer model, and confirm that the version (NA) is consistent.
- Power off the printer, remove the toner cartridge, and locate the installation slot of the old chip.
- Check the orientation of the old chip, insert the Biyan TN-635X series chip into the slot in the correct direction, and ensure the chip contacts are fully seated with the socket.
- Reinstall the toner cartridge, power on the printer, and run a printer self-test.
Usage Precautions
The chip described in this guide is a toner cartridge chip, not an imaging drum chip.
Before replacing the toner cartridge chip, please fully refill the toner cartridge with carbon toner first. Otherwise, the chip will fail to take effect, or the printer will prompt a low yield warning.
If you need to replace the imaging drum chip, please ensure the imaging drum is intact before replacement to avoid triggering printer error codes.
When handling and installing chips (especially in dry autumn environments), please first discharge static electricity from your body or wear an anti-static wrist strap to prevent the chip from being damaged by electrostatic discharge.
Copyright Statement
Our store and our company’s agency brand is "Biyan" brand chips. The chips produced and sold by our company are compatible chips, which have no direct affiliation with the original brand.
Company Introduction
Caiyi Office Consumables was established in 2008. Its main business covers printer chips, imaging drums, toner cartridges, carbon toner and other related consumable accessories.
