参数
版本：NA（北美地区）。
以上芯片适用于：Brother HL-L8430CDW / HL-L8430CDWT / HL-L8570CDW。
适用机型
本组芯片对应 Brother HL-L8430CDW、HL-L8430CDWT、HL-L8570CDW。更换前请核对机身型号，避免错购。
使用方法
- 关闭打印机电源，确认设备停止工作。
- 打开前盖，取出粉盒。
- 看清芯片卡槽方向，将 TN-635 系列粉盒芯片按正确方向推入到位，确保与触点贴合。
- 装回粉盒，盖上前盖，重新开机，查看面板识别状态。
使用注意
类型说明：以上参数对应的是粉盒芯片（类型：粉），非硒鼓芯片。
粉盒芯片提示：注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。
鼓芯片提示：要确保硒鼓完好状态下更换，才不容易出现代码报错。
防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。
版权声明
本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。
公司介绍
彩一办公耗材，公司成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。
Specifications
Region Version: NA (North America)
The above chips are applicable to: Brother HL-L8430CDW / HL-L8430CDWT / HL-L8570CDW.
Compatible Printer Models
This set of chips is designed for Brother HL-L8430CDW, HL-L8430CDWT and HL-L8570CDW printers. Please verify your printer model number before replacement to avoid purchasing incompatible products.
Usage Instructions
- Power off the printer and confirm the device has completely stopped all operations.
- Open the front cover and remove the toner cartridge.
- Check the orientation of the chip slot first, then push the TN-635 series toner cartridge chip into the slot in the correct direction until it is fully seated, ensuring it makes full contact with the contact terminals on the slot.
- Reinstall the toner cartridge, close the front cover, power the printer back on, and check the chip recognition status on the printer control panel.
Usage Precautions
Type description: The parameters above correspond to toner cartridge chips (Type: Toner), not imaging drum chips.
Toner cartridge chip reminder: Please refill the toner cartridge to its full rated capacity before replacing the chip. Otherwise, the chip will fail to activate, or the printer will display an alert indicating insufficient toner level.
Drum chip reminder: To avoid error code alerts, ensure the imaging drum is intact and in normal working condition before replacing the drum chip.
Anti-static warning: When handling and installing the chips (especially in dry environments such as autumn), you must first discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic discharge (ESD) from damaging the chip.
Copyright Notice
All chips produced and sold by our company are compatible aftermarket chips, and have no direct affiliation with original equipment manufacturer (OEM) brands.
Company Introduction
Caiyi Office Consumables was founded in 2008, and its core business covers printer chips, imaging drums, toner cartridges, toner powder and other related consumable accessories.
#打印机芯片,碧砚,兄弟,TN-635,粉盒芯片,兼容耗材
参数
版本：NA（北美地区）。
以上芯片适用于：Brother HL-L8430CDW / HL-L8430CDWT / HL-L8570CDW。
适用机型
本组芯片对应 Brother HL-L8430CDW、HL-L8430CDWT、HL-L8570CDW。更换前请核对机身型号，避免错购。
使用方法
- 关闭打印机电源，确认设备停止工作。
- 打开前盖，取出粉盒。
- 看清芯片卡槽方向，将 TN-635 系列粉盒芯片按正确方向推入到位，确保与触点贴合。
- 装回粉盒，盖上前盖，重新开机，查看面板识别状态。
使用注意
类型说明：以上参数对应的是粉盒芯片（类型：粉），非硒鼓芯片。
粉盒芯片提示：注意加满碳粉后再更换芯片，否则芯片不生效或会提示数值不满。
鼓芯片提示：要确保硒鼓完好状态下更换，才不容易出现代码报错。
防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。
版权声明
本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。
公司介绍
彩一办公耗材，公司成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。
Specifications
Region Version: NA (North America)
The above chips are applicable to: Brother HL-L8430CDW / HL-L8430CDWT / HL-L8570CDW.
Compatible Printer Models
This set of chips is designed for Brother HL-L8430CDW, HL-L8430CDWT and HL-L8570CDW printers. Please verify your printer model number before replacement to avoid purchasing incompatible products.
Usage Instructions
- Power off the printer and confirm the device has completely stopped all operations.
- Open the front cover and remove the toner cartridge.
- Check the orientation of the chip slot first, then push the TN-635 series toner cartridge chip into the slot in the correct direction until it is fully seated, ensuring it makes full contact with the contact terminals on the slot.
- Reinstall the toner cartridge, close the front cover, power the printer back on, and check the chip recognition status on the printer control panel.
Usage Precautions
Type description: The parameters above correspond to toner cartridge chips (Type: Toner), not imaging drum chips.
Toner cartridge chip reminder: Please refill the toner cartridge to its full rated capacity before replacing the chip. Otherwise, the chip will fail to activate, or the printer will display an alert indicating insufficient toner level.
Drum chip reminder: To avoid error code alerts, ensure the imaging drum is intact and in normal working condition before replacing the drum chip.
Anti-static warning: When handling and installing the chips (especially in dry environments such as autumn), you must first discharge static electricity from your body or wear an anti-static wrist strap to prevent electrostatic discharge (ESD) from damaging the chip.
Copyright Notice
All chips produced and sold by our company are compatible aftermarket chips, and have no direct affiliation with original equipment manufacturer (OEM) brands.
Company Introduction
Caiyi Office Consumables was founded in 2008, and its core business covers printer chips, imaging drums, toner cartridges, toner powder and other related consumable accessories.
