以上芯片适用于：HP OfficeJet Pro 9110b / 9117b / 9120r / HP OfficeJet Pro 9110 / 9125e / 9128e / 9129e / 9130b / 9135e / 9730e

版本说明：NA（北美区域版本）

本系列芯片适用机型同上，仅限列表内机型。

安装前关闭打印机电源，打开耗材仓取出对应耗材。将芯片对准卡槽方向平稳推入，确认触点完全接触后装入打印机，开机即可识别。注意芯片方向标识，避免反向安装导致触点损坏。

类型区分：当前参数未标注鼓/粉，默认为芯片（无鼓芯片/粉芯片）。

防静电警告：在使用和安装芯片时（特别是秋天干燥环境），需要先去除人体静电或佩戴防静电手环，以防击穿芯片。

本公司生产/销售的芯片为兼容芯片，与原装品牌并无直接关联。本店经营及本公司代理品牌为“碧砚”品牌芯片。

The chips listed above are compatible with: HP OfficeJet Pro 9110b / 9117b / 9120r / HP OfficeJet Pro 9110 / 9125e / 9128e / 9129e / 9130b / 9135e / 9730e

Version Note: NA (North American Version)

The compatible printer models for this chip series are the same as listed above, limited exclusively to the models within the list.

Power off the printer before installation. Open the consumables compartment and remove the corresponding consumable. Align the chip with the slot direction and insert smoothly. Confirm that the contacts are fully engaged, then load into the printer and power on for automatic recognition. Note the chip orientation marking; avoid reverse installation to prevent contact damage.

Type Distinction: The current specifications do not indicate drum or toner units; these are chips by default (toner cartridge chips, not drum chips).

Anti-static Warning: When handling and installing chips (particularly in dry autumn environments), static electricity must be discharged from the body or anti-static wrist straps must be worn to prevent chip damage from electrostatic discharge.

The chips produced and sold by our company are compatible chips and have no direct affiliation with the original brand. Our store operates and our company distributes chips under the “Biyan” brand.

Caiyi Office Consumables: Established in 2008, the company primarily engages in printer chips, imaging drums, toner cartridges, toner powder and other accessory products.

The chips listed above are compatible with: HP OfficeJet Pro 9110b / 9117b / 9120r / HP OfficeJet Pro 9110 / 9125e / 9128e / 9129e / 9130b / 9135e / 9730e

Version Note: NA (North American Version)

The compatible printer models for this chip series are the same as listed above, limited exclusively to the models within the list.

Power off the printer before installation. Open the consumables compartment and remove the corresponding consumable. Align the chip with the slot direction and insert smoothly. Confirm that the contacts are fully engaged, then load into the printer and power on for automatic recognition. Note the chip orientation marking; avoid reverse installation to prevent contact damage.

Type Distinction: The current specifications do not indicate drum or toner units; these are chips by default (toner cartridge chips, not drum chips).

Anti-static Warning: When handling and installing chips (particularly in dry autumn environments), static electricity must be discharged from the body or anti-static wrist straps must be worn to prevent chip damage from electrostatic discharge.

The chips produced and sold by our company are compatible chips and have no direct affiliation with the original brand. Our store operates and our company distributes chips under the “Biyan” brand.

Caiyi Office Consumables: Established in 2008, the company primarily engages in printer chips, imaging drums, toner cartridges, toner powder and other accessory products.