产品概述
本文档旨在为行业专业人员提供碧砚品牌兼容芯片的技术参数与适配说明。本系列芯片专为富士胶片（Fujifilm）ApeosPort C2410SD及ApeosPort Print C2410SD机型设计，用于粉盒耗材的计数与识别。产品严格遵循对应机型的通信协议，确保数据读取稳定。
参数说明与版本定义
- 容量标识：1.5K与4.5K代表芯片对应的标称打印页数（基于5%覆盖率A4幅面测算）。实际输出量受打印覆盖率、介质类型及设备设置影响，参数仅供技术参考。
- 版本区域：芯片固件已按销售区域进行区分。
CHN代表中国大陆地区版本，AP代表亚太区域版本。不同区域版本的固件协议存在差异，请务必根据设备销售地选择对应版本，跨区域使用可能导致设备无法识别或报错。 - 颜色代码：K（黑色）、C（青色）、M（品红色）、Y（黄色）。
适配机型与规格清单
安装与使用注意事项
本系列产品为粉盒芯片。更换前请务必确认粉盒已加满碳粉。若碳粉未加满直接更换芯片，设备可能无法正确读取余量，或提示数值不满、芯片不生效。
若涉及鼓组件芯片更换，请确保硒鼓组件完好且无物理损伤，否则易引发设备故障代码。
安装时请保持芯片触点清洁，避免静电击穿或物理刮擦。上机后请等待设备完成初始化自检。
版权声明
本公司生产的碧砚品牌芯片均为兼容耗材芯片，旨在提供稳定的第三方替代方案。本产品与富士胶片等原装品牌并无直接关联，所有商标及型号仅用于适配说明。
公司介绍
彩一办公耗材成立于2008年，主要业务涉及打印机芯片、硒鼓、粉盒、碳粉等配件业务。公司致力于提供参数严谨、兼容性稳定的办公耗材解决方案。
#打印机芯片,富士胶片C2410SD,兼容粉盒芯片,碧砚芯片,办公耗材
Product Overview
This document is intended to provide industry professionals with the technical specifications and compatibility guidelines for Biyan brand compatible chips. This chip series is specifically engineered for Fujifilm ApeosPort C2410SD and ApeosPort Print C2410SD models, facilitating toner cartridge page counting and identification. The products strictly comply with the communication protocols of the corresponding printer models, ensuring stable and reliable data transmission.
Parameter Specifications & Version Definitions
- Page Yield Designation: 1.5K and 4.5K indicate the nominal page yield associated with the chip (calculated based on 5% coverage on A4 paper). Actual output may vary depending on print coverage, media type, and device settings. These parameters are provided for technical reference only.
- Regional Version: Chip firmware is segmented by sales region.
CHNdenotes the version for Mainland China, whileAPdenotes the Asia-Pacific region version. Firmware protocols differ across regional versions. Please ensure you select the correct version matching the device’s region of sale. Cross-region usage may result in recognition failure or trigger device error codes. - Color Codes: K (Black), C (Cyan), M (Magenta), Y (Yellow).
Compatible Models & Specifications List
Installation & Usage Precautions
This product series consists of toner cartridge chips. Prior to replacement, please verify that the toner cartridge has been fully refilled. Installing a new chip on a partially filled cartridge may prevent the device from accurately reading the remaining toner level, potentially resulting in low-toner warnings or chip activation failure.
If replacing chips on a drum unit, ensure the drum assembly is intact and free of physical damage. Failure to do so may trigger device fault codes.
During installation, keep the chip contacts clean to prevent electrostatic discharge (ESD) damage or physical abrasion. After installation, allow the printer to complete its initialization and self-diagnostic cycle before use.
Copyright & Trademark Disclaimer
All Biyan brand chips manufactured by our company are compatible consumable chips, designed to provide a reliable third-party alternative. This product is not affiliated with, endorsed by, or directly associated with Fujifilm or any other OEM brands. All trademarks and model numbers are cited solely for compatibility reference purposes.
Company Profile
Founded in 2008, Caiyi Office Consumables specializes in printer chips, drum units, toner cartridges, toner powder, and related accessories. The company is dedicated to delivering office consumable solutions characterized by rigorously validated specifications and stable compatibility.
